3-10
■
Using the POSITION Keys
(5)
Move the pen carriage to the desired position by pressing the
keys.
The coordinates of the pen carriage's position are displayed while “X=” and “Y=” continue to blink.
Skip to Step
(6)
.
X=+01000
Y=+01000
■
Direct numeric input
(5)
Press the
M O D E
key to permit the new origin position to be selected by numeric input of the coordinates.
Use the
or
key to move to the column you wish to change (the selected column blinks).
To switch between
+
and
–
, press the
or
key. To set a numeral, press the
or
key until the
desired numeral is displayed.
X=+00000
Y=+00000
X=+00300
Y=+00000
(6)
When the desired origin position is displayed, press the
E N T E R
key. To cancel the setting, press the
C A N C E L
key instead of the
E N T E R
key.
When the
E N T E R
key is pressed, the message below briefly appears.
Offset
OK!
(7)
When the message below appears, press the
M O D E
key to return to Ready mode.
X=
Y=
