1-11
1.7 Connecting to Your Computer
The plotter can be connected to a computer via the parallel (Centronics-compatible) port, serial (RS-232C)
port, or USB port. Select which port to use according to the requirements of your application software and/or
which of your computer's interface ports are available for use.
Use a Centronics-compatible parallel cable, serial cable, or USB cable in accordance with the connection
method chosen. Obtain a Graphtec-approved interface cable that is compatible with the interface ports
(Centronics-compatible parallel and serial cables are available separately).
(1)
Check to confirm that the Power switch is turned off (the “
O
” side is down).
(2)
Connect the cable between the plotter and the computer. Make sure the connectors at the plotter and
computer ends are correctly oriented.
