manualshive.com logo in svg

GRAPHTEC CE7000 Series, User Manual

The GRAPHTEC CE7000 Series User Manual is available for free download from our website. This comprehensive manual provides detailed instructions and essential information for operating and maximizing the potential of your CE7000 plotter. Enhance your user experience and download the manual today from manualshive.com.

Share
Download
background image

9-4

9.2 

Clearing the Buffer Memory

This function allows you to clear all the output data in the plotter's buffer memory.

 CAUTION

Do not execute the BUFFER CLEAR function until the operation of the plotter is stopped.

Operation

Supplement

Perform the settings in Normal mode.

 1 

Press the [PAUSE/MENU] key.

 MENU screen is displayed.

 2 

Press the POSITION ( ) key (I/F).

 INTERFACE screen (1/3) is displayed.

 3 

Press the [1] key (BUFFER CLEAR).

 BUFFER CLEAR screen is displayed.

Supplement

It will return to INTERFACE screen (1/3) without 
changing the settings when you press the [ESC] 
key (CANCEL).

 4 

Press the [1] key (YES, CLEAR).

 Buffer will be cleared and it will return to default screen.

Summary of Contents for CE7000 Series



































































































































































































































































































































































Reviews:

No comments

Related manuals for CE7000 Series

Canon iPF800 Series Service Manual preview
iPF800 Series
Brand: Canon Pages: 320

Brands by name

Popular brands

Load more brands