3-8
Basic Settings and Operations
3.5
Stop Function
Cutting or plotting can be stopped by pressing the
(PAUSE) key while cutting or plotting is in progress.
Raising or lowering the media set lever while cutting or plotting is stopped does not require the medium to be
selected, and so the medium can be replaced or reset.
If "PAUSE" has been specified at the "PAUSE key" Special Functions menu
(1) Press the
(PAUSE) key while cutting or plotting is in progress to stop cutting or plotting and
display the PAUSE menu.
C O N T I N U E J O B
(2) Press he
(NEXT) or
(PREV.) key to alternate the display between "CONTINUE JOB"
and "QUIT JOB".
C O N T I N U E J O B
Q U I T J O B
(3) Pressing the
(ENTER) key while "CONTINUE JOB" is displayed cancels the pause
function and restarts cutting or plotting.
(4) Pressing the
(ENTER) key while "QUIT JOB" is displayed displays the BUFFER CLEAR
confirmation screen for aborting the cutting/plotting operation.
C L E A R < Y E S >
(5) Press the
or
key to alternate the display between "YES" or "NO". To abort the cutting/
plotting operation, stop the transmission of data from the computer, select "YES", and then
press the
(ENTER) key. All the cutting/plotting data stored in the buffer is cleared and the
plotter returns to Ready status.
To cancel the aborting of the cutting/plotting operation, select "NO" and then press the
(ENTER) key.
The plotter returns to the "CONTINUE JOB" display.
If "MENU" has been specified at the "PAUSE key" Special Functions menu
Note: This setting is the factory default setting
The PAUSE menu is displayed after operation has been stopped to enable the various settings to
be changed.
(1) Press the
(PAUSE) key while cutting or plotting is in progress to stop cutting or plotting and
display the following menu.
(2) Change the PAUSE menu settings.
(3) Press the
(PAUSE) key to cancel the PAUSE status and restart cutting or plotting.
