GRANULDISK Lean Wash Center X2, User Manual, Page: 31 / 37

4 Daily cleaning
Fig. 27 Wipe along the edges of the
tank
77 Wipe along the edges of the
tank with a wet cloth.
See Fig. 27
Wipe along the
edges of the tank
88 X2 Lean Wash Center® is now ready for the next serving.
Leave the hood open to let air circulate.
NOTE
Do not leave X2 Lean Wash Center® switched on if it is not
used for some time or if the operator is not able to monitor
it directly.
NOTE
If X2 Lean Wash Center® is not going to be used for quite
some time you have to empty the detergent and rinse aid
dispensing device to avoid crystallizations and damages
to the pump. Remove the priming pipes from the detergent
and rinse aid containers and soak them in a container of
clean water. Run some wash cycles and empty the ma-
chine completely. To finish switch off the main off/on switch
and shut off the water inlet tap.
Rev. 2022-04 31