GRANULDISK Lean Wash Center X2, User Manual, Page: 18 / 37

2 Operating 2.2 Start and operation
2.2 Start and operation
11 Switch on the main electrical switch.
The display lights up and goes in OFF-mode.
If
automatic hood: the hood goes down to calibrate.
Fig. 3 Filling with water
22 Press and hold the ON/OFF
button in the upper left corner.
The display lights up and X2
Lean Wash Center® starts to
fill with water and heat up to
the correct temperatures in
the wash and rinse tank.
If automatic hood: the hood
goes up and will remain open
during the filling and heating
phase.
The filling and heating time is
approx. 9 min at 55 °C water
inlet temperature.
The CONFIRM button is yellow
during the filling and heating
phase.
See Fig. 3
Filling with water
Fig. 4 X2 is ready to use
33 X2 Lean Wash Center® is
ready to operate when the
CONFIRM button has turned
green.
See Fig. 4
X2 is ready to use
18 Rev. 2022-04