GRANULDISK Lean Wash Center X2, User Manual, Page: 20 / 37

2 Operating 2.2 Start and operation
Fig. 8 Countdown
66 When X2 Lean Wash Center®
is running the display will
show a countdown of the
wash cycle and the CONFIRM
button turns blue.
See Fig. 8
Countdown
Fig. 9 Thermostop
77 If the rinse temperature is not
achieved the wash phase
continues until the correct
temperature is reached (85°).
See Fig. 9
Thermostop
88 The program is ready when the CONFIRM button turns green.
• Automatic hood — the hood goes up automatically.
• Manual hood — lift up the hood manually.
Fig. 10 Choose Water change
99 If water change is needed,
press and hold the ON/OFF
button and choose by arrow
down “Water change”
See Fig. 10
Choose Water
change
Confirm by pressing the
CONFIRM button.
Draining, filling and heating
the tank again takes about 5
min.
20 Rev. 2022-04