Grant Instruments
30641 V1.3
Yoyolog
Page 18
Operating Manual
7.4
Logger Setup - General
Click on
Logger Setup
, to define general settings for
the logger, i.e. channel settings, alarm settings).
A picture of the logger is displayed so the inputs/slots
can be identified.
The battery capacity is displayed in the same picture. If
the battery status is “green” the battery is still in a
usable condition. If the battery is red, it should be
replaced soon and only a short term logging period
should be performed.
Click on the
General
tab and then enter a logger name
this can be used for later for identification.
Click on “
More values
“, to set the calculated readings
required.
Select the calculated values as they are required to be
returned. These will be stored in the same ASCII-file as
the original data.
Note:
If the calculated values are not selected, the .bin
file can be imported and the calculated values can be
selected as appropriate.