Grant Instruments
30641 V1.3
Yoyolog
Page 11
Operating Manual
5.2
Search for Devices
Locate the USB port of the logger, next to the battery, and plug in the
USB cable supplied with the logger.
Plug the other end of the USB cable into any USB port on the PC.
Windows will automatically identify the logger using the
USB-Express driver. In the YoyoView software a picture of
your datalogger will appear. This may take up to 30 seconds.
Normally a logger will be automatically detected when connected. If the
logger is not automatically detected click on the icon or
Devic-
es/Search
in order to scan the USB ports for new devices.
Up to 6 dataloggers can be connected to the PC at any one
time. A picture will appear for each logger allowing
communication to anyone of them.
If more than 6 loggers are connected, only 6 will be shown.
NOTE:
If the picture of the logger does not appear please check if
the USB cable is properly connected and then refer to chapter 8 for
troubleshooting.
