Grant Instruments
30641 V1.3
Yoyolog
Page 15
Operating Manual
7.2
Start/stop logger
Clicking on
Start Logger
in the logger control window will bring up
the settings for logging.
Note:
that if the logger is already logging data, the
Start Logger
command will not be available. Instead the
Stop Logger
command
will be displayed.
In the
Start DataLogging
window
there are the following settings:
Logger Start condition
,
Logger Stop
condition
,
Interval (unit/value)
and a
run description
.
The logger can be started
immediately
or at
a specific date/time
.
When set to
immediately
the logger will start logging from the nearest full minute.
To change the settings l click on the arrow button next to the
default condition.
To set the logger to start at a specific
date/time, change the
Start
Logger at
-
condition to
Select Date.
Then browse the
calender
to change the
Start date
and
time.