Grant Instruments
30641 V1.3
Yoyolog
Page 16
Operating Manual
In the
Start Datalogger
window, the
Stop condition
for the logger can be set.
If the
Memory full
option is selected the loggers will
stop logging when the memory is full.
If
never (cont mode)
option is selected the logger will
start to overwrite the oldest readings when the memory
is full.
To set the interval rate of the readings, select the unit ; Hours, Minutes, Seconds or
Hertz and define the Interval Value.
Examples:
to log every 10 Minutes, select
Minutes
at the Section
Interval
and enter
10
as the
Interval Value.
To log at 5 Hertz, select
Hertz
at the Section
Interval
and enter
5
as the
Interval Value.
Finally, a
Description
of up to 46 characters can be entered. This Description will be
stored in the datafile to identify the readings when viewed later.
When all settings have been entered as required, click on
Start logger now
.
Once started a message will appear to confirm the logger has started logging
successfully.
