Edition 2.04
– December of 2021
Overhead Stirrer Multi Mixer MM-1000
Page 8
Operating Manual
6.9.2.
Rota Reci Vibro motions.
Set the speed (40-1000 rpm, fig. 4/A) and time (1-250 s,
fig. 4/D) of rotational motion. Set the angle (30-
360º, fig. 4/B) and time (1-250 s, fig. 4/E) of reciprocal
motion. Reciprocal and rotational motions have the same speed. Set the turning angle (1-
5º, fig. 4/C)
and time (1-5 s, fig. 4/F) for vibro motion. Graph in figure 5 shows motion in this mode.
Figure 4.
Figure 5.
6.9.3.
Rota Reciprocal m Pause.
Set the speed (40-1000 rpm, fig. 6/A) and time (1-250
s, fig. 6/D) of rotational motion. Set the angle (30-
360º, fig. 6/B) and time (1-250 s, fig. 6/E) of reciprocal
motion. Reciprocal and rotational motions have the same speed. Set the turning angle of vibro motion
to zero (fig. 6/C). Set the time of vibro motion (1-5 s, fig. 6/F) - this is the duration of pause. Graph in
figure 7 shows motion in this mode.
Figure 6.
Figure 7.
6.9.4.
Vibro Pause.
Turn off Rotational motion by setting time of rotational motion to zero (OFF,
fig. 8/C). Set the turning angle of reciprocal motion to zero (fig. 8/A) and set the time for reciprocal
motion (1-250 s, fig. 8/D) - this is the duration of pause. Set the turning angle (1-
5º, fig. 8/B) and time
(1-5 s, fig. 8/E) for vibro motion. Graph in figure 9 shows motion in this mode.
Figure 8.
Figure 9.