P a g e
|
94
UCM630xA Series User Manual
Version 1.0.9.10
SSH Access
SSH switch now is available via Web GUI and LCD. User can enable or disable SSH access directly from Web
GUI or LCD screen. For web SSH access, please log in UCM630xA web interface and go to Web GUI
System
Settings
Security Settings
SSH Access.
The "Enable SSH access" option is for system debugging. If you enable this option, the system will allow SSH
access. The SSH connection also requires the username and password of the super administrator. This option
is turned off by default. It is recommended to turn off this option when debugging is not required.
Enable the "Enable remote SSH (via GDMS)" option, the system will allow remote SSH access via the GDMS
platform. This option is turned off by default, and it is strongly recommended to turn off this option when remote
troubleshooting is not required.
Figure
34: SSH Access
Table 20: SSH Access
Enable SSH Access
This option is used for system debugging. Once enabled, UCM will allow SSH
access. The SSH connection requires super administrator's username and
password. The default setting is "No". It is recommended to set it to "No" if there is
no need for debugging.
Enable Remote SSH
via GDMS
If this option is enabled, remote SSH access will be allowed through the GDMS
platform. It is strongly recommended to keep this disabled unless remote
troubleshooting is necessary.
