background image

 

W

ELCOME

 

Congratulations on becoming an owner of HT488.  You made an excellent choice and we hope you enjoy 
all of its capabilities.  
 
Grandstream's HT488 is an all-in-one VoIP integrated access device that features superb audio quality, 
rich functionalities, high level of integration, compactness and ultra-affordability.  The HT488 is fully 
compatible with SIP industry standard and can interoperate with many other SIP compliant devices and 
software on the market.  
 
Grandstream HT488 is a new addition to the popular HT product family. It is an enhanced model 
compared to the award-winning HT488 in that it allows call origination and termination from/to the PSTN 
network (via FXO port) remotely and automated emergency call routing through PSTN network. 
 
Grandstream HT488 has been awarded the Best of Show product in 2005 Internet Telephony Conference 
and Expo. 

 

S

AFETY 

C

OMPLIANCES

 

The HT488 adaptor complies with FCC/CE and various safety standards. The HT488 power adaptor is 
compliant with UL standard.  Only use the universal power adapter provided with the HT488 package.  
The manufacturer’s warranty does not cover damages to the phone caused by unsupported power 
adaptors. 
 

W

ARRANTY

 

If you purchased your HT488 from a reseller, please contact the company where you purchased your 
phone for replacement, repair or refund.  If you purchased the product directly from Grandstream, contact 
your Grandstream Sales and Service Representative for a RMA (Return Materials Authorization) number 
before you return the product.  Grandstream reserves the right to remedy warranty policy without prior 
notification. 
 

Caution: 

 

Changes or modifications to this product not expressly approved by Grandstream, or operation 

of this product in any way other than as detailed by this User Manual, could void your manufacturer 
warranty.

 

 
 
 
 
 
 
 
 

 

This document is contains links to Grandstream GUI Interfaces.  Please remember to download these 
examples

 

http://www.grandstream.com/user_manuals/GUI/GUI_HT488.rar

 for your reference. 

 

 

This document is subject to change without notice.  The latest electronic version of this user manual is 
available for download from the following location:

 

http://www.grandstream.com/pdf/HT488UserManual.pdf

 

 

 

Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, 
for any purpose without the express written permission of Grandstream Networks, Inc. is not 
permitted. 

Grandstream Networks, Inc. 

HT488 User Manual 

Page

 

4 of 33  

 

Firmware 1.0.3.64 

Last Updated: 4/2007

 

Summary of Contents for HT-488


































Reviews: