C
ONFIGURATION
G
UIDE
C
ONFIGURING
HT488
THROUGH
V
OICE
P
ROMPT
DHCP
M
ODE
Follow Table 3 with voice menu option 01 to enable HT488 to use DHCP.
S
TATIC
IP
M
ODE
Follow Table 3 with voice menu option 01 to enable HT488 to use STATIC IP mode, then use option 02,
03, 04 to set up HT488’s IP, Subnet Mask, Gateway respectively.
TFTP
S
ERVER
A
DDRESS
Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server.
F
IRMWARE
S
ERVER
IP
A
DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C
ONFIGURATION
S
ERVER
IP
A
DDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
U
PGRADE
P
ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F
IRMWARE
U
PGRADE
M
ODE
Select
voice menu option 17
to choose firmware upgrade mode. There are three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
C
ONFIGURING
HT-
488
WITH
W
EB
B
ROWSER
HT488 ATA has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT488 through a Web browser such as
Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not
included).
Access the Web Configuration Menu
The HT488 HTML configuration page can be accessed via LAN or WAN ports.
•
From the LAN port:
1. Directly connect a computer to the LAN port
2. Open a command window on the computer
3. Type in “ipconfig /release”, the IP address etc becomes 0
4. Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by
default
5. Open a web browser, type in the default IP address of the LAN port.
http://192.168.2.1
1. You will see the log in page of the device.
Grandstream Networks, Inc.
HT488 User Manual
Page
17 of 33
Firmware 1.0.3.64
Last Updated: 4/2007
