GXP1610/GXP1620/GXP1625/GXP1628
Administration Guide
Page 35 of 48
connecting a PC to the PC port. The default setting is "Enable".
PC Port VLAN Tag
Assigns the VLAN Tag of the PC port.
PC Port Priority Value
Assigns the priority value of the PC port.
Enable LLDP
Control the LLDP (Link Layer Discovery Protocol) service.
MAINTENANCE PAGE DEFINITIONS
Maintenance -> Web Access
End User Password
Allows the administrator to set the password for user-level web GUI access.
This field is case sensitive with a maximum length of 30 characters.
Confirm Password
Confirms the end user password field to be the same as above.
Admin Password
Allows users to change the admin password. The password field is purposely
hidden for security purpose. This field is case sensitive with a maximum
length of 30 characters.
Confirm Password
Confirms the admin password field to be the same as above.
Maintenance ->Upgrade and Provisioning
Firmware Upgrade and
Provisioning
Specifies how firmware upgrading and provisioning request to be sent:
Always Check for New Firmware, Check New Firmware only when F/W
pre/suffix changes, Always Skip the Firmware Check.
XML Config File
Password
The password for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Always Authenticate
Before Challenge
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server.
Validate Hostname in
Certificate
To validate the hostname in the SSL certificate.
Upgrade Via
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Config Server Path
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
Firmware File Prefix
This field enables user to store different versions of firmware files in one
single directory on the firmware server. If configured, only the firmware file
with the matching prefix will be downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one
single directory on the firmware server. If configured, only the firmware file
with the matching postfix will be downloaded.
Config File Prefix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.
Config File Postfix
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching postfix will be downloaded.
Allow DHCP Option 43
Default setting is “Yes”. DHCP option 66 originally was only designed for
