P a g e
|
72
GVC3210 Administration Guide
Version 1.0.1.21
Maintenance/Troubleshooting
Parameters
Descriptions
Logcat
Clear Log
It is used to clear the log files saved in device.
Log Tag
It is used to configure the filter to display the specified process log file.
Log Priority
It is used to select the log priority to display. It can be selected from the following:
Verbose
Debug
Info
Warn
Error
Fatal
Silent (suppress all output)
The default setting is “Verbose”.
Debug
Capture Trace
Press the START button to start capturing a trace, and press STOP to stop the capture
process. The default setting is close.
Trace List
Selects the existing capture file. Press the DELETE button on the right to delete file.
View Trace
Click the “List” button to view the traces, which are listed according to time when the
traces were captured. Click the trace name to download it to PC. The captures files
are saved in FileManager
SD Card
ppp folder
.
Syslog
Syslog protocol
Configure sending syslog through UDP or secured SSL/TLS protocol to syslog server.
Syslog Server
Address
The URL/IP address for the syslog server.
Syslog Level
Selects the level of logging for syslog. The default setting is "None". There are 4 levels:
DEBUG, INFO, WARNING and ERROR. Syslog messages are sent based on the
following events:
1. Product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. Sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. Inbound and outbound calls (INFO level)
6. Registration status change (INFO level)
7. Negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. Memory exception (ERROR level)
