P a g e
|
50
GVC3210 Administration Guide
Version 1.0.1.21
{^1900x+ | <=1617>xxxxxxx} –prevents dialing any number started with 1900 and
1617 area code will be added automatically when dialing number with 7-digit
length
Note:
In some cases, where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider, the *
should be predefined inside the dial plan feature. An example dial plan will be:
{*x+ } which allows the user to dial * followed by any length of numbers.
Refer-To Use
Target Contact
It is used to set if the device will use the target’s Contact header tag to the Refer-To
header in the SIP REFER message during an attended transfer. Default setting is
"No".
Auto-Answer
It is set to allow answering an incoming call. If it is set to "Yes", the device will
automatically enable the speaker phone to answer all the incoming calls after a short
reminding beep. The default setting is "No".
Send Anonymous
It is used to set if the device will make an anonymous outgoing call. If it is set to "Yes",
the "From" header in the SIP INVITE messages will be set to anonymous, essentially
blocking the Caller ID to be displayed. The default setting is "No".
Reject
Anonymous Call
If it is set to "Yes", the device will reject the calls whose SIP INVITE message includes
Anonymous information in the From header. The default setting is "No".
Call Log
It is used to categorize the call logs saved for this account. If it is set to “Log All”, all
the call logs of this account will be saved.
If set to Log Incoming/Outgoing Calls (Missed Calls Not Record), the whole call history
will be saved other than missed call. If it set to Disable Call All, none of the call history
will be saved. The default setting is "Log All".
Special Feature
It is to configure device’s setting to meet different vendors server requirements. Users
can choose from Standard, Broadsoft, CBCOM, RNK, China Mobile, ZTE IMS,
Mobotix, ZTE NGN, or Huawei IMS depending on the server type. The default setting
is "Standard".
Feature Key
Synchronization
It is used for the Broadsoft standard call feature synchronization. If it is enabled, the
device will send SIP SUBSCRIBE message to the server and receive SIP NOTIFY
message from the server to synchronize the DND, Call Forwarding and Call Center
features. The default setting is "Disable".
Enable Call
Features
If set to "Yes", call features (including call forwarding, DND and etc.) will be supported
locally instead of using the feature code supported on SIP server/proxy. For example,
if *72+number is dialed, the incoming calls will be forward to this number
unconditionally. The default setting is "No".
Refer to the chapter
Call Features
for more details in the GVC3210 User Guide.
Ring Timeout (s)
It is used to define the expiration timer (in seconds) for the rings with no answer. The
default setting is 60.
