Firmware 1.0.0.17 Page 12 of 18
Grandstream Networks, Inc. 08/2009
Popup Video
– If it is checked, a pop up video window will appear on receiving an alarm
report.
Display Warning in the Electronic Map
– If it is checked, the corresponding icon of that
channel in the electronic map will flash red on receiving an alarm report.
Write into Alarm Log
– If it is checked, the alarm event will be written to the alarm log
4.
Click
Add
to save the settings.
NOTE
:
Available rules will be listed on the left side of the
Event Configuration
window.
GSurf allows you to have various alarm actions.
Edit alarm action rules
1.
From GSurf, click
Configuration > Event Configuration
.
2.
The
Event Configuration
window will pop up.
3.
Select the rules you would like to edit.
4.
Enter the required information.
5.
Click
Edit
to save the changes.
Remove alarm action rules
1.
From GSurf, click
Configuration > Event Configuration
2.
The
Event Configuration
window will pop up.
3.
Select the rules you would like to remove.
4.
Click
Delete
to remove the rule.
Configure the GSurf to take actions on alarm report
1.
From GSurf, click
Configuration > Device Configuration
.
2.
Select the device you would like to monitor the
alarm reports.
3.
The configuration page will comes out.
4.
In
Alarm Triggers and Rules
section, check
Triggers
.
5.
If you would like the monitor the
Motion
Detection
events, select a rule from the dropdown list. If you would like the monitor the
Alarm Input
events, select a rule for it in the dropdown list. If you would like to monitor
both, select a rule for each of them.
NOTE
:
The available rules you created in
Event Configuration
will be listed in the
Select a
Rule
dropdown list.
6.
Click
Save
to save all the changes.
Check
Triggers
and
select a rule
GSurf – Set up Alarm Triggers and Rules
