Grandio GRA-BASE-S128 Installation Manual Download Page 50

Page: 50 / 80

12X24 FLA

T MOUNT

BASE

* The Flat Mount Base is included in each Summit Greenhouse Kit. The Flat Mount Base is designed to be installed on a wooden deck or concrete

slab type surface. If you are using a Steel Base Kit for installing into the earth you will follow these instructions to assemble the Flat Mount

section, but will then attach the Flat Mount Kit onto your Steel Base Kit.

The Flat Mount Kit will be assembled as shown in this section, then secured to the surface of your choice using the proper anchoring hardware.

You will drill all holes into your surface for the entire base kit and temporarily afﬁx into place, you will need to remove the front and back

sections in order to build your front and back walls as will be shown in the Summit Greenhouse Assembly Manual 2.

12x24

Flat Mount Base Kit Assembled

GRANDIO SUMMIT 12x24 FLAT MOUNT BASE ASSEMBLY

LEFT

BACK

RIGHT

FRONT

144” / 3658 mm

284 3/16” / 7218 mm

FRONT SECTION WILL BE TEMPORARILY ATTACHED

BACK SECTION WILL BE TEMPORARILY ATTACHED

Summary of Contents for GRA-BASE-S128

















































































Search results

Summary of Contents for GRA-BASE-S128

Reviews:

Related manuals for GRA-BASE-S128

Brands by name

Popular brands

Grandio GRA-BASE-S128, Installation Manual

Search results

Summary of Contents for GRA-BASE-S128

Reviews:

Related manuals for GRA-BASE-S128

Brands by name

Popular brands