43
LEFT
BACK
RIGHT
FRONT
GRANDIO SUMMIT 12x20 FLAT MOUNT BASE INSTALLATION
1. Square and Level your Flat Mount Base Kit to your Concrete or Wooden surface or pad.
2. Measure corner to corner and confirm square. Use the appropriate anchoring fastener that was chosen at the time of purchase.
Reference the instructions that come with your anchoring kit. Drill the holes into your surface, blow out the debris, then install the screws. Keep
the Left side (12C, 12F, and 12D) and the Right side (12C, 12G, and 12E) in place with the anchors installed and tightened into place.
3. You will need to remove the Front and Back Flat Mount Base sections in order to build the Front and Back walls, as the base pieces will be
used for the bottom edge of the Front and Back walls. You will re-attach the base pieces into place once the Front and Back walls are built.
12X20 FLA
T MOUNT
BASE
