602A
L08C-X
S04
ML01
BA-S2
4.12
Before you attach the 602A’s to the sides of
the greenhouse you will need to loosen the ML01
(nut) attached to the L08C-X and the base. See
diagram .
1. Once the bottom of one L08C-X is loosened set
the 602A onto the bolt of the the L08C-X. Be sure
that the 602A is sitting flush on top of the base kit.
See for reference.
2. Hold the 602A in place and attach the top of
the 602A to the 609 using S04/ML01 (nut and
bolt). As shown in .
3. Repeat steps 1. and 2. on all four corners where
the L08C-X ‘s meet the base kit.
4. Now attach the bottom of 602A to the Base
using a S04/ML01 (nut and bolt) as shown in ,
and to the 609 with an S04/ML01 combo as is
shown in .
Inside View
609
602A
Inside View
601B
L08C-X
602A
L08C-X
BA-S2
609
BA-S2
602A
Inside View
ML01/S04
ML01/S04
MIDDLE ASSEMBLY CONTINUED
Slide L08C-X
into place
Loosen only one L08C-X at a time.
29
STEP F
OUR
