53
takes a 2 x 2 configuration scene as an example.
Preparation:
One encoder N143
Four decoders N373s
One 10/100Base-T Ethernet switch.
One HDMI source device
Four sinks
One computer installed with the control software
Five HDMI cables and six CAT5e/6 cables
Hardware Connection
1. Connect one DVD player to the N143 via a HDMI cable.
2. Connect the N143 to the 10/100Base-T Ethernet switch with a CAT5e/6
cable.
3. Connect four TVs to the N373s via four HDMI cables.
4. Connect the N373s to the switch with four CAT5/6 cables.
5. Connect your computer to the switch with a CAT5e/6 cable.
6. Connect all the devices to the power supplies and power them on.
Note:
If the switch doesn’t support PoE function, please remember to plug in
the power adapters of Transmitters/Receivers
Operation
1. Double-click
HDMIoverIPConsole.exe
to launch the control software;
Click
Search
as shown below to start searching TX/RX, and one MX153
Summary of Contents for N373
Page 1: ...Version V1 0 1 User Manual N143 N373 N383 Presentation Switcher H 264 Encoder and Decoder ...
Page 47: ...45 2 Right click MX153 to display the shortcut menu ...
Page 57: ...55 3 Configure the intersection between TX and RX in different cells in the Scene area ...
Page 60: ...58 5 Right click on any cell and choose Combine to display the Video Wall Properties window ...