Page 10
2.5) Set IP Button
Click this button to set IP address for LAN control (for example: 192.168.0.3).
2.6) IR Set button
Click this button to set IR code for remote control. The device will enter ire set mode.
You can edit your ire code in this mode.
Step:
"
1, Read the ire code first by pressing "Read Code” button.
"
2, Select the code with cursor which you want to change.
"
3, Press the button on your remote control with the remote against to the device. And the
selected code will change to this button code.
"
4, when you finish it, click the "write code" button. It will write the new code onto device.
"
5. Close the IR Code setting window. The device will enter normal mode from IR setting
mode.
Notices:
All the codes have to be filled in and no blank is allowed. The same data codes are not
allowed, and every data code should be different.
