background image

 

 

 Page 22

 

 Maintenance 

Clean this unit with a soft, dry cloth.

 

Never use alcohol, paint thinner or benzine 

to clean this unit. 
 

 Product Service 

 Provided Service 

1) 

Damage Requiring service: 

The unit should be serviced by qualified 

service personnel if: 

z

 

The DC power supply cord or AC adaptor has been damaged; 

z

 

Objects or liquids have gotten into the unit; 

z

 

The unit has been exposed to rain; 

z

 

The unit does not operate normally or exhibits a marked change in performance; 

z

 

The unit has been dropped or the cabinet damaged. 

2) 

Servicing Personnel: 

Do not attempt to service the unit beyond that described in 

these operating instructions. Refer all other servicing to authorized servicing personnel. 

3) 

Replacement parts:

 

When parts need replacing ensure the service uses parts 

specified by the manufacturer or parts that have the same characteristics as the original 

parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 

4) 

Safety check:

 

After repairs or service, ask the service to perform safety checks to 

confirm that the unit is in proper working condition. 

 

Mail-In Service 

When shipping the unit, carefully pack and send it prepaid, adequately insured and preferably 

in the original carton. Include a letter detailing the complaint and provide a daytime phone 

and/or email address where you can be reached. 

If repair is needed during the limited warranty period the purchaser will be required to furnish a 

sales receipt/proof of purchase indicating date of purchase, amount paid and place of 

purchase. Customer will be charged for the repair of any unit received without such proof of 

purchase. 

Summary of Contents for MX0808-N50




























Reviews: