Grand ranger R380 Owner'S Manual Download Page 13 | Manualshive

Page: 13 / 73

background image

SAFETY

13 Ranger R380, R420, R460 Owner’s Manual

MAXIMUM NUMBER OF PERSONS

The Maximum number of people ( children) authorized to be on board according to design
standards ISO 6185, ISO 14946 and ISO 12217 is given in the technical data sheet in the
“TECHNICAL INFORMATION” section.

DO NOT EXCEED THE MAXIMUM RECOMMENDED NUMBER OF PEOPLE. REGARDLESS OF THE
NUMBER OF PEOPLE ON BOARD, THE TOTAL WEIGHT OF PEOPLE AND EQUIPMENT MUST
NEVER EXCEED THE MAXIMUM RECOMMENDED LOAD. ALWAYS USE THE SEATS/SEATING
SPACES PROVIDED.

MAXIMUM LOADING CAPACITY

You can find the maximum load capacity in the “TECHNICAL INFORMATION” section in this Manual.
It is also shown on the manufacturer’s plate affixed to the hull. Please note that the maximum load
capacity includes the weight of all people onboard, outboard engine, provisions, personal effects,
and additional equipment. Note that excess and unevenly distributed load within the boat can
create unstable steering conditions and even loss of control.

«
...
11
12
13
14
15
...
»

Summary of Contents for ranger R380










































































Reviews:

No comments

Related manuals for ranger R380

224 Sunesta Wide Xtreme

Brand: Chaparral Pages: 51

Brand: Hobie Pages: 25

Brand: YAMARIN Pages: 35

Brand: Blade Pages: 19

GP1200R WaveRunner 2001

Brand: Yamaha Pages: 245

Brand: Access Dinghy Pages: 27

Brand: J/Boats Pages: 77

Brand: WASZP Pages: 17

Jeanneau Sun Odyssey 410 2021

Brand: Cascadia Pages: 49

Brand: NorthStar Pages: 2

Brand: Feathercraft Pages: 16

Fairline Phantom Flybridge Cruisers 46 - Borasco

Brand: FAIRLINE Pages: 24

Brand: Pearson Pages: 66

Brand: Pearson Pages: 82

Brand: Pearson Pages: 84

Brand: Polycraft Pages: 22

Brand: BRIG Pages: 36

Brand: BRIG Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands