38
11.1.4.3 Refresh:
To refresh the videos, the recording process will be stopped and restart again.
If the video is unstable after some high CPU resource programs, CPU usage may come to 100% and all
the resources are taken. In that case, the system may run in slower mode than ever. Please click
“Refresh” to renew the system and get it backs to higher performance.
11.1.4.4 Record:
Record the current camera only.
11.1.4.5 Snapshot:
Take a snapshot of live video.
11.1.4.6 Scheduler:
Set the recording mode based on the weekday hour.
(1) Please click on the weekday hour block to change the recording mode or just drag the mode to the
weekday hour block.
(2)
Enable Motion Detection
: Enable/ Disable the motion detection function.
(3)
Post-Alarm Recording
: Enter the recording duration (seconds) after motion is detected
NOTE
: If you want to use the motion detection recording function, be sure to enable the
Motion
Detection
function and set the
Post-Alarm Recording
, and confirm the
Motion Detection
(refer to
section 8.11) and the
Alarm Picture
(refer to section 8.11) have been enabled.
(4) Please save the file before exiting the setting dialog.
(5) Press
the
Apply
button to update the current scheduler, and press the
SAVE
or
Save As
button to
save the configuration. Press the
QUIT
button to exit.
(6) Repeat the above steps to set up the other cameras.
(7) After setting, press the
Record
button on the right side of the screen to start scheduled recording.
39
11.1.5 Hard Disk Info.
File package and disk free space amount.
11.1.6 Channels
16 channels indicators to control the function buttons.
11.2 Play the Recorded Files
The recorded files can be played by Windows Media Player program.
Step1.
Open the Windows Media Player and select
Now Playing.
Step2.
Drag the recorded files to the list on the right side of the window.
Step3.
Simply double-click the recorded file on the list and it will begin to play.
