22
8.10 Date and Time Settings
User could click on the “NTP” in the Menu List for configuring the time of Mega Pixel IP Camera.
Synchronized with Time Server:
Use a NTP server to configure the time of Mega Pixel IP
Camera
-
NTP Server:
Enter the NTP server the user wants to use.
-
Time Zone:
Enter the Time Zone in which Mega Pixel IP Camera is located.
Manual Update:
Configure the time of Mega Pixel IP Camera manually.
-
Date:
Specify the date here.
-
Time:
Specify the time here.
Synchronized with PC:
When this function been selected, Mega Pixel IP Camera will
synchronize its time with the PC that is browsing it.
Save button:
Save and apply the configuration.
23
8.11 Motion Detection Settings
Mega Pixel IP Camera supports the motion detection function. When this function is enabled, Mega Pixel
IP Camera will monitor the video captured by it. And Mega Pixel IP Camera will send alarm e-mail with
image/video or upload the image/video to a FTP server when some object moves in the video.
Detect Frame Interval:
Define the detection frame interval here.
Window:
Define the detection area which needs to be monitored in the video. User could draw this
area by using the x and y coordinates.
-
Motion Detection On/Off:
Enable/Disable this detection area. The lower this value, the easier
the motion detection is triggered.
-
Sensitivity:
Defines a value of the changes. It compares the last image and the current image
and counts changes. A small value means more sensitivity.
-
Threshold
: Set the threshold of the motion detection function.
-
Start/Stop Coordinate:
Using the X, Y coordinate to draw the scope of the detection area.
Alarm Picture:
Configuring the alarm picture here. The pictures will be sent with the alarm e-mail
or upload to the FTP server when motion is detected.
-
Enable:
Enable/Disable the alarm picture function.
-
Filename:
Set the name of the pictures sent along with the e-mail or uploaded to the FTP server.
Alarm Video:
Configuring the alarm video here. The video clips will be sent with the alarm e-mail
or upload to the FTP server when motion is detected.
-
Enable:
Enable/Disable the alarm video function.
-
Pre-Alarm I Frame Number:
Set the I frame number the user wants to capture before the motion
happened.
-
Post-Alarm I Frame Number:
Set the I frame number the user wants to capture after the motion
happened.
-
Filename:
Set the name of the video clips sent along with the e-mail or uploaded to the FTP
server.
