SERVICE AND MAINTENANCE
103
Golden Line G850 Owner’s Manual
CLEANING OF TUBE
An important factor for the long life of tube fabric is regular adequate cleaning.
The subsequent cleaning procedure is recommended:
Rinse off with clear, tap water (approx. 20 °C).
Use gentle soapy water (pH value neutral to slightly alkaline) to wash the tube by
means of a soft cloth or brush. Do not leave the soapy water on the surface for more
than 5 minutes.
Clean the surface very thoroughly and make sure that no soap residue remains on the
surface.
Then dry by wiping off the surface with a soft cloth.
DO NOT USE:
Any cleaning device that might cause mechanical damage to the surface such as hard
brushes, high-pressure washers, etc.
Any cleaning agents (scouring agents or scrubbing powder), which will damage the
surface.
Strong alkaline cleaning agents.
Acid cleaning agents.
Solvent based cleaning agents (e. g. based on ester, ketone, ether, furan or benzol).
Petrol, diesel, kerosene.
Summary of Contents for Golden Line G850
