OPERATING THE CRAFT
54
BATTERY ISOLATOR SWITCH
The battery isolator switch is designed to isolate the battery from the boat’s electrical circuit.
It is used when the boat is in long-term storage to prevent the battery becoming drained, during
maintenance (this should be done by qualified electrical technician. See also “ELECTRICAL
SYSTEMS” in the section “SAFETY”) and in emergency cases.
Fig. 18. Battery isolator
switch.
Specification:
Operating voltage: up to 48 Volt DC.
Nominal current: 250 A.
Max. current: 450 A - 5 min / 700 A - 10 sec.
The battery isolator switch is located on the internal
side of the rear compartment in an accessible place
for the operator. It should be accessible at all times
for disconnecting all devices from the battery.
The battery must NEVER be disconnected from the engine when it is running!
Summary of Contents for Golden Line G850
