Grand Seiko Quartz 4J51 Operating Instructions Manual Download Page 20

Daily care

The watch requires good daily care

○ Do not wash the watch when its crown is at the extended position.

○ Wipe away moisture, sweat or dirt with a soft cloth.

○ After soaking the watch in seawater, be sure to wash the watch in clean pure water and wipe

it dry carefully. Do not pour running water directly from a faucet onto the watch. Put some

water into a bowl first, and then soak the watch in the water to wash it.

 * If your watch is rated as “non-water resistant” or “water resistant for daily use”, do not wash

the watch.

“CHECK THE CALIBER NUMBER AND WATER-RESISTANT LEVEL”→ P. 3

Turn the crown from time to time

○ In order to prevent corrosion of the crown, turn the crown from time to time.

○ The same practice should be applied to a screw down crown.

“Crown”→ P. 10

36

TO PRESERVE THE QUALITY OF YOUR WATCH

Band

The band touches the skin directly and becomes dirty from sweat or dust. Therefore,

lack of care may accelerate deterioration of the band or cause skin irritation or stain

on the sleeve edge.

The watch requires a lot of attention for long usage.

Metallic band

Moisture, sweat or soil will cause rust even on a stainless steel band if they are left for a long

time.

Lack of care may cause a yellowish or gold stain on the lower sleeve edge of shirts.

○ Wipe off moisture, sweat or soil with a soft cloth as soon as possible.

○ To clean the soil around the joint gaps of the band, wipe it out in water and then brush it off

with a soft toothbrush 

Protect the watch body from water splashes by wrapping it up in plastic

wrap etc.

Wipe off the remaining moisture with a soft cloth.

○ Because some titanium bracelets use pins made of stainless steel, which has outstanding

strength, rust may form in the stainless steel parts.

○ If rust advances, pins may poke out or drop out, and the watch case may fall off the bracelet,

or the clasp may not open.

○ If a pin is poking out, personal injury may result. In such a case, refrain from using the watch

and request repair.

Leather band

○ A leather band is susceptible to discoloration and deterioration from moisture, sweat and

direct sunlight.

○ Wipe off moisture and sweat as soon as possible by gently blotting them up with a dry cloth.

○ Do not expose the watch to direct sunlight for a long time.

○ Please take care when wearing a watch with light-colored band, as dirt is likely to show up.

Refrain from wearing a leather band watch other than Aqua Free bands while swimming, and

when working with water even if the watch itself is water-resistant enforced for daily use.

Silicone band

As for material characteristics, the band is easily dirtied, and may be stained and discolored.

Wipe off dirt with a wet cloth or cleaning tissue.

○ Unlike bands of other materials, cracks may result in the band being cut. Take care not to

damage the band with an edged tool.

Notes on skin irritation and allergy

Skin irritation caused by a band has various reasons such as allergy to metals or leathers, or

skin reactions against friction on dust or the band itself.

Notes on the length of the band

Adjust the band to allow a little clearance with your wrist to ensure proper airflow.

When wearing the watch, leave enough room to insert a finger between the band

and your wrist.

37

TO PRESERVE THE QUALITY OF YOUR WATCH

English

Summary of Contents for Quartz 4J51























Reviews: