Normal position
First click position
Second click
position
First click position
First click
position
Set the date also at this point if necessary.
* The crown can be turned in either direction to set the date, however, it is recommended
to turn the crown in the direction which enables you to set the date with a smaller
adjustment.
* If the time you want to set is between 7:00 p.m. and 1:00 a.m., first return the time to 6:00
p.m., and then turn the crown counterclockwise (6 o’clock direction) so the hands advance
in the clockwise direction to set the time.
* Turn the crown slowly, checking that the hour hand moves in one-hour increments.
* When setting the hour hand, the other hands may move slightly. However, this is not a
malfunction.
Normal position
First click position
3
Push the crown back in
simultaneously with the time signal.
* The minute hand and the seconds
hand will be set correctly.
4
To move on to the hour hand and date
setting, pull out the crown to the first
click.
5
Turn the crown to set the hour hand.
While turning the crown, the moment
the date changes is midnight. When
setting the hour hand, be sure that
AM/PM is set correctly.
6
Push the crown back in to complete
the time setting.
(If the watch is equipped with the
screw down crown, relock the
crown.)
16
HOW TO USE
HOW TO USE (FOR CAL. 9F85)
Date adjustment at the end of the month
It is necessary to adjust the date after February (which has 28 days, 29 days in a leap year) and
a 30 day month.
Two full rotations of the hour hand will change the date for one day.
The date advances one day by turning the hour hand two full rotations clockwise (for 24 hours).
First click position
2
Each time the hour hand makes two full rotations by turning the crown, the date is adjusted
one day.
While turning the crown, the moment the date changes is midnight.
When setting the hour hand, be sure that a.m./p.m. is set correctly.
Turning the crown counterclockwise (6 o’clock
direction):
Each time the hour hand makes two full
rotations, the date is advanced one day.
* The crown can be turned in either direction
to set the date, however, it is recommended
to turn the crown in the direction which
enables you to set the date with a smaller
adjustment.
* Turn the crown slowly.
* When setting the hour hand, the other hands
may move slightly. However, this is not a
malfunction.
Turning the crown clockwise (12 o’clock
direction):
Each time the hour hand makes two full
rotations, the date is set back one day.
1
Pull out the crown to the first click.
(If the watch is equipped with the
screw down crown, unscrew the
crown before pulling it out.)
First click position
Before date
adjustment
First click position
First click position
17
HOW TO USE
HOW TO USE (FOR CAL. 9F85)
English
