HOW TO USE (FOR CAL. 9F86)
How to set the time and date
To set the time and date, set the 24-hour hand and minute hand first, and then set the hour hand
and date.
Normal position
First click
position
Second click
position
First click
position
Second click
position
1
Pull out the crown to the second click
when the seconds hand is at the 12
o’clock position. (The seconds hand
stops on the spot.)
(If the watch is equipped with the
screw down crown, unscrew the
crown before pulling it out.)
2
Turn the crown counterclockwise (6
o’clock direction) to rotate the 24-hour
hand and minute hand clockwise and
set them to the current time.
Due to the mechanism of the quartz
watch, to set the time accurately, first
turn the minute hand 4 to 5 minutes
ahead of the desired time and then
return it to the correct time.
* Only the 24-hour and minute
hands are to be set first. Even if the
hour hand is indicating incorrect
time, or the date may be altered
depending on the position of the
hour hand, it is not necessary to
make an adjustment at this stage.
20
HOW TO USE
HOW TO USE (FOR CAL. 9F86)
Normal position
First click position
Second click
position
First click position
First click
position
Set the date also at this point if necessary.
* The crown can be turned in either direction to set the date, however, it is recommended
to turn the crown in the direction which enables you to set the date with a smaller
adjustment.
* If the time you want to set is between 7:00 p.m. and 1:00 a.m., first return the time to 6:00
p.m., and then turn the crown counterclockwise (6 o’clock direction) so the hands advance
in the clockwise direction to set the time.
* Turn the crown slowly, checking that the hour hand moves in one-hour increments.
* When setting the hour hand, the other hands may move slightly. However, this is not a
malfunction.
Normal position
First click position
3
Push the crown back in
simultaneously with the time signal.
* The setting of the 24-hour, minute
and seconds hands is now
completed.
4
To move on to the hour hand and date
setting, pull out the crown to the first
click.
5
Turn the crown to set the hour hand.
While turning the crown, the moment
the date changes is midnight. When
setting the hour hand, be sure that
AM/PM is set correctly.
6
Push the crown back in to complete
the time setting.
(If the watch is equipped with the
screw down crown, relock the
crown.)
21
HOW TO USE
HOW TO USE (FOR CAL. 9F86)
English
