16
REVERSING THE DOOR SWING
This instruction is based on a unit with
a right door hinge installed already.
*All removed parts should be saved
in case of door re-reversal.
TO REVERSE THE DOOR HINGES
1. Prize up the hinge screw holes cover
[1] and hinge cover [2] with a straight
screwdriver. Take out the upper hinge
by loosening the screws (3a), and lift
up the whole door. See Figure 1
Figure 1
1
2
4
3a
5
2. Move the support rod (6] (at the bottom
of the door) from the right to the left
side. Move the hinge hole cover (at
the top of the door) from the left side
to the right side. See Figures 2 & 3.
Figure 2
6
6
3b
3b
Figure 3
7
7
3. Pull out the bottom hinge cover (9) and
take out the bottom hinge by loosing
the screws. Loose the 4 screws on the
bottom left side. Install the bottom
hinge to the left side while screw the
holes on the right side. See Figure 4.
Figure 4.1
8
9
3c
10
11
Figure 4.2
10
8
3c
GRCU4731-User Guide GC100 GC166.indd 16
GRCU4731-User Guide GC100 GC166.indd 16
20/9/22 5:14 pm
20/9/22 5:14 pm
