12
POWER ON/OFF CONTROL
• When the appliance is plugged in to a
power outlet, it powers on automatically.
• Touch the power mark and
hold for 10 seconds to turn off
(or turn on) the appliance.
• No matter whether the appliance is under
a locked or unlocked situation, you can turn
off the appliance by touching the power
mark and holding for 10 seconds.
Warning: To avoid breaking
the compressor, please do not
turn on the appliance again within
5 minutes after you turn it off.
UNLOCKING THE CONTROL PANEL
• To unlock the control panel, touch the
power mark and lighting mark
with 2 fingers at the same time and
hold for 3 seconds. When unlocked
a buzz sound will be heard.
• The control panel will be automatically
locked with a buzz sound heard after
10 seconds without being touched.
• Under the locked situation, the control
panel will not react to any touch
operation other than for lighting on/
off and temperature setting.
INTERIOR LIGHTING ON/OFF CONTROL
• Under the unlocked situation, touch
the lighting mark to turn on (or
turn off) the interior LED lighting.
• The lighting will be continuously
on if it is not turned off.
TEMPERATURE DISPLAY WINDOW
• The temperature is displayed in digital
display form. The digital display is shown as
the set temperature when you are setting
the temperature, and it will change to
be the actual temperature inside cabinet
after 10 seconds without being touched.
• When the temperature probe is out of
order, the display window will show
with “HH” or “LL” instead of a digital
figure while a continuous buzz sound
will be heard. In case of this happens,
this appliance is designed to keep
the compressor and fan running
periodically which helps to keep the
desired temperature of the inside
cabinet to protect your stored wines.
Warning: To avoid destroying
your stored wines, it is
strongly recommended to have the
appliance repaired immediately,
as the periodical running cannot
ensure the appliance will achieve
the temperature you have set.
TEMPERATURE SETTING
For Single Zone beverage fridge:
• The temperature setting range
is 5-22°C (41-72°F).
• Directly touch the or mark to set
the wine fridge temperature as you want.
• The first touch on or mark will
recall the previous set temperature
displayed in the digital window. If the
appliance runs after a power failure (or
unplugging), the previous set temperature
does not exist and is replaced by the
defaulted temperature at 10°C.
• Touch the mark to increase the set
temperature by 1°C (or by 1°F). On the
contrary, touch the mark to decrease
the set temperature by 1°C (or by 1°F).
GRCU4731-User Guide GC100 GC166.indd 12
GRCU4731-User Guide GC100 GC166.indd 12
20/9/22 5:14 pm
20/9/22 5:14 pm
