Grammer ACTIMO XL, Operating Instructions Manual

Page: 23 / 85

Seat functions and operation
GB
23
Weight adjustment
The seat must be adjusted for the driver's
weight by briefly pulling the actuator lever of
the automatic weight and height adjuster
(arrow) with the vehicle at a standstill and the
driver sitting on the seat
.
The driver must sit absolutely still during
adjustment.
Before adjusting the weight, adjust
shock absorbers to the position “soft”.
To prevent damage to the health, the
setting for the driver’s weight must be
checked and adjusted individually before the
vehicle is driven.
Height adjustment
The seat height can be set pneumatically and
is continuously adjustable.
The seat height can be altered by pulling or
pushing the adjustment lever fully up or down
(arrow). If the adjustment reaches the top or
bottom endstop, the height is adjusted
automatically in order to guarantee a
minimum spring travel.
Before adjusting the height, adjust
shock absorbers to the position “soft”.
In order to avoid damage, do not
operate compressor for more than 1 minute
Absorber *
The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The cushioning effect can be individually
adjusted for this purpose.
Turn the lever to the desired position and
release
1 soft
2 medium
3 hard
Position 2 is the basic setting recommended
by the manufacturer for an average driver's
weight.
* if fitted ** depending on model *** optional extra