11
5.
SOFTWARE VERSION IDENTIFICATION
Firmware version is V 6.xxx, where
“
xxx
”
is referred to different functions
which
doesn’t
affect legally relevant parameters.
K3X
terminal display shows for 2” the embedded software version after
power on.
Full information on
K3X
terminal module and Xtrem ADPD module can be
show on the LCD display by following next steps:
Press
to
enter the menu settings
.
Press
button until the display shows the option
, then press
The following information will be shown:
K3X terminal embedded software version (V 6.xxx)
K3X terminal production reference (lot)
Related information on the Xtrem scale connected:
Serial number XXXXXX
Seal switch state as “UNPROT” / “PROT”
Software version as “S 3.007”
Weighing scale full capacity and verification interval.
Full information on the weighing scale configuration can be print using the
menu settings option:
→
...
→
→
…
→
→
…
→