2
This manual is a generic guide
. The assembly of a Talk Table and is used as an
example. Your particular configuration may vary. Please refer to your personalized shop
drawing included in packaging.
Please call the factory if you have any questions at (970) 225-1956.
Tools needed
:
1. #2 Phillips screw driver ( Power drill with barrel magnet makes it much easier )
2. 2 each— 7/16” open end wrenches
Table of Contents
1. Equipment/PBC cabinet assembly……………………………………….………...3
2. Attach stringers & Utility panel…………………………………… ………………..4
3. Install
bases……………………………….………………………………………….5
4. Attach rear doors & Bolt cabinets together………………...……………………...6
5. Tabletop installation..……………………………………………………………….. 7
6. HP
assembly………..………………………………………………………………...8
Care and Maintenance
Surfaces may be cleaned with mild soap and water.
Note : We will replace any damaged part at cost.
