MEMORY CLEARANCE
When a measurement is finished or when the device is on
standby, hold down button ‘M1’ or ‘M2’ for at least 5
seconds, the display will show ‘CLR’ which means the
stored reading for ‘M1’ or ‘M2’ is removed as shown in
Fig.11.
Fig.9
Fig.10
Fig.11
MEMORY FUNCTION
MEMORY RECALL
1
.
The device can store 90 sets of readings respectively in ‘M1’ and ‘M2’, and
will automatically calculate the average value of the latest 3 readings for
‘M1’ and ’M2’. When the memory is full (90 sets of readings are stored),
the oldest reading will be replaced by a new one. Readings in memory
will not clear even if power supply is removed;
2
.
When a measurement is finished or the device is on standby, the user can
press button ‘M1’ or ‘M2’ to recall memory. Press button ‘M1’ or ‘M2’, the
display will show the average value of the latest 3 readings as shown in
Fig.9;
3
.
Press again, the display will show ‘01’, which means the latest reading,
then turns to another screen to show readings and measuring time as
shown in Fig.10;
4
.
Press again, the display will show ‘02’, which means the second to the
last reading.
13
