6
JB0112-014-INS-LABRevB07
6. SET-UP
1. Connect either end of the connecting tubing (item# 4) to the top of collection bottle connector
then connect the other end to the bacteria filter.
2. The patient tubing should be connected to collection bottle at the outlet labeled (patient). Please
assure that all connections are secure and without leaks before using.
7. HOW TO OPERATE YOUR JOHN BUNN SUCTION UNIT
1. Before use, check the specification label on the side of the suction unit to ensure that the
voltage and current indicated on the unit correspond with the voltage and current available.
Make sure the power switch located on the side of the unit is in the “Off” position before
connecting the unit to a power source.
2. Switch the power switch to “I” position (on), the unit will start running.
Figure 3
“Off” position
Figure 4
“On” position
