JB0112-090-INS-LAB-RevA18 14
TROUBLESHOOTING
If your Nebulizer Compressor fails to function, consult the following
Troubleshooting guide. If the problem persists, consult your Graham-
Field authorized distributor.
Problem
Cause and Solution
Device doesn’t
operate
Check if plug is properly fit into a grounded electrical
outlet.
When device has been run continuously for more than 30
minutes, auto-shut-down may have been activated by the
built-in thermal protector; ensure device is OFF for at least
30 minutes before next usage.
Nebulization is
weak
Check for proper electrical voltage.
Check tubing for blockage or air leakage at connection to
compressor or nebulizer cup; replace as needed.
Check that the nebulizer cup is properly assembled and
not damaged. If there is any damage, replace as needed.
Check if filter is dirty; replace filter as needed.
Summary of Contents for JB0112-090
Page 18: ......
