HP_4E2-INS-LAB-RevA21 8
2 UNCRATING INSTRUCTIONS
IMPORTANT — REPORT ANY SHIPPING DAMAGE IMMEDIATELY:
WARNING
:
Inform shipper of any damage — leave carton intact. Leave equipment in the
receiving area until inspection is complete.
NOTICE — POSSIBLE EQUIPMENT DAMAGE:
s
NOTICE: The crate contains fragile, expensive medical equipment. Uncrate and handle
carefully. If after uncrating the equipment you find any damage (no matter how slight),
report the damage to GF Health Products, Inc.
WARNING — PERSONAL INJURY HAZARD:
WARNING
:
When cutting bands, always use tool specifically designed for that purpose.
This will help avoid personal injuries possibly incurred when bands are cut and tension is
released.
ENVIRONMENTAL CONDITIONS
Operating
Temperature
5°C to 40°C
Relative Humidity
20% to 90% @ 30°C
Atmospheric Pressure
700 to 1060 hPa
Storage and Transport
Temperature
-10°C to 50°C
Relative Humidity
20% to 90% @ 30°C
Atmospheric Pressure
700 to 1060 hPa
UNPACKING INSTRUCTIONS
IMPORTANT: Follow each step in the order shown in these instructions.
Your Hausted equipment has been carefully packed at our manufacturing plant to ensure safe
shipment to your medical facility. There are several procedures you must follow to put your new
equipment in service. These procedures only take a few minutes to complete and all are required
to ensure proper operation of the equipment.
1. Cut the two bands around the shipping carton.
2. Remove the top half of the carton and cut one side of the bottom half.
3. Remove the equipment from the carton.
4. Check to see if all features of the equipment work properly. If all the features work, advance to
step 5. If any features do not work properly, call GF Health Products, Inc. at 1.770.368.4700.
Info: Although the equipment has been fully charged prior to shipment, plug the unit into a wall
socket prior to checking any electric features.
5. Clean the equipment using mild detergent to remove any dirt accumulated during shipment,
and place the equipment into service.
