Operation
20
3.2.2 Offset Function (Machines without Calibration
Recognition)
On machines without calibration recognition, the “Offset function” can be used to
slightly adjust the laying position on the tray, for example, a stack can be placed on the
left, in the centre or on the right of the tray.
Example:
The stacking function has been selected. If
the function button (stacking) is pressed
again, three bars appear in the display.
The plus “+” and minus “-” buttons can be used to
change the position of the highlighted bar and the laying
position of the cutting material is moved on the tray
correspondingly.
OFFSET FUNCTION
CHANGE OF LAYING POSITION
Stacking Left,
centre,
right
Long fanning
Left, centre, right
Cross fanning
Rear, centre, front
Circular fanning
Larger Ø, medium Ø, smaller Ø
