3 0 6 B
I M I N I
8–10
O p e r a t i o n O f O p t i o n a l F e a t u r e s
B
OW
T
HRUSTER
The optional bow thruster aids in maneuvering your boat. The outboard engines can control
the direction of the stern while the bow thruster moves the bow side to side. Use the joystick
control located at the helm to control the thruster. The emergency shut-off switch, located below
the binnacle controls and to the starboard side, provides a simple method to quickly disconnect
power from the thruster motor. Depress this button to disengage the thruster in the event of an
emergency.
D
OCKSIDE
P
OWER
The dockside power feature provides AC current to the battery charger located in the console
rigging area. This is a dedicated system, supplying power only to the battery charger. It does not
supply current to any other panels or devices on your boat The dockside power is used by
connecting the heavy duty cable supplied with the boat to an appropriate external power source.
This cable provides power to the boat’s AC inlet which is routed directly to the battery charger.
See
“Dockside Power” on page 8–28
for more information on component location and wiring
specifics.
Connecting The Dockside Power
1. Verify that the external power source is a 3 wire grounded system with amperage and
voltage ratings compatible with the boat’s AC system ratings.
2. Be sure there is sufficient cable length to allow for normal movement between the boat and
the dock.
3. Turn the circuit breaker under the starboard deckwing to off. Turn the circuit breaker at the
dock outlet to off.
4. Connect the dockside power cable at the boat inlet first.
5. Connect the dockside power cable at the dock outlet and turn the dock outlet circuit breaker
to "on".
6. Turn the circuit breaker under the starboard deckwing to the "on" position.
Disconnecting The Dockside Power
1. Switch the circuit breaker under the starboard deckwing off.
2. Switch the circuit breaker off at the dock outlet.
3. Disconnect the dockside power cable at the dock outlet first.
4. Disconnect the dockside power cable at the boat inlet.
C A U T I O N
Always disconnect the dockside power cable if leaving the boat unattended for an extended period
of time.
N O T I C E
Keep inlet cover closed tightly when not in use.
!
