![background image](http://html1.mh-extra.com/html/graco/xm-pfp-273231/xm-pfp-273231_repair-and-parts-manual_2251613016.webp)
Repair
16
3A8047B
Display
Replace Display Battery
1. Remove four screws (504f) then remove access
cover (504e).
2. Use a flat head screwdriver to pry out old battery.
3. Replace with new battery. Ensure battery fits under
connector tabs before snapping other end in place.
NOTE:
Use only Panasonic CR2032 batteries for
replacement.
4. Use screws (504f) to install access cover (504e).
Replace Display
Order display kit (504) for replacement.
1. Disconnect power.
2.
, see page 19.
3. Disconnect CAN cable from display module.
4. Remove four screws (504f) from rear display panel
(504c) while holding front display panel (504d) in
place.
NOTE:
To ease removal use clear tape to hold front
display panel (504d) in place.
5. Remove rear display panel (504c) and disconnect
display cable and key switch cable (539) from
circuit board.
NOTICE
To avoid damaging circuit board, wear a grounding
strap.
504f
504e
Battery
r_xm1a00_312359_313289_2a
Connector
Tabs
Remove Old Battery
Insert New Battery
NOTICE
To avoid damaging circuit board, wear a grounding
strap.
r_
31
23
59
_3
13
28
9_
24
a
504f
504d
504c
Summary of Contents for XM PFP 273231
Page 46: ...Parts 46 3A8047B WL D...
Page 67: ...Notes 3A8047B 67 Notes...