Operation
334513A
25
4.
Reinstall spring pin (34) in desired stroke position.
5.
Reassemble the molded guard (26) to pump.
Wolverine Advanced
This pump has infinite stroke adjustment positions
between full stroke and half stroke.
1.
Disconnect main power from pump.
2.
Expose the drive shaft (33) by loosening the cap
screws (27) and removing the drive guard (26). The
cap screws will remain with the drive guard.
3.
Loosen the stroke adjustment nuts (36), and move
to desired stroke location and re-tighten.
4.
Reassemble the drive guard (26) to pump.
F
IG
. 5 Wolverine Basic stroke adjustment positions
33
35
3/4 stroke
Full (1”, 25 mm)
(3/4”, 19 mm)
1/2 stroke
(1/2”, 13 mm)
F
IG
. 6 Wolverine Advanced stroke adjustment
36
