8.
Open the motor on/off pilot ball valve (G) located
on base of applicator.
t
i21578a
Figure 14
9.
Open bleed type master air valve (B).
B
ti21574a
Figure 15
10. Rotate the air regulator adjustment knob (F)
clockwise until pump begins to move slowly.
F
ti21570a
Figure 16
NOTICE
NOTICE
NOTICE
To prevent damage to pump seals caused by
cavitation, run the pump slowly until the system
is primed.
11. Continue running the pump until all of the flushing
fluid is dispensed into the pail. The system is
now wetted out.
ti21632a
Figure 17
332612C
17
