background image

Installing A Battery

BATTERY USE TIPS

Remove battery from Parent’s Unit if it will not be used for a long time.

Remove a dead battery promptly. A dead battery left in unit may leak, 

damaging your unit.

Do not attempt to recharge a non-rechargeable battery.

A rechargeable battery CANNOT be recharged by plugging AC adapter into 

the Parent’s Unit. Remove the battery from unit to recharge it.

Charging of a rechargeable battery should only be done by an adult.

Battery power will be conserved when Parent’s Unit is powered through AC

adapter. It is not necessary to remove battery when using AC adapter.

Change battery if:

!!

Signal reception becomes poor.

!!

Static noise develops (also check for appliance interference).

The Parent’s Unit can be operated on 9 volt battery power. An

alkaline battery is recommended.

Battery changing should only be done by an adult.

Push in with

a key, 

screwdriver,

or other

object at

angle and lift

Using AC Adapters

The Parent’s Unit can use either a 9 volt battery or standard 120 volt AC household

current. The Nursery Unit uses standard 120 volt AC household current only. The

included AC adapters must be used for this purpose.

To use AC adapters, plug the connector on the cord into the AC adapter jack on the
side of the unit. Then plug adapter into a standard wall outlet. 

Use ONLY the Graco

®

adapters

included with the unit. Do not use these adapters

with other equipment under any circumstances.

If units do not work, check that AC adapters are plugged into working outlets.

When electricity is off (from a power failure, etc.), the transmitter will NOT work,

since it 

only

operates on AC current.

5

902-4-00

6

Reviews: