31
7.
NEVER
put two
LATCH
connectors on one
vehicle
LATCH
anchor
.
8. Test infant restraint for secure installation as
described in infant restraint
“Final Safety
Check” page 42.
9. Check that the
LATCH
stays tight and does not
slip from the tightened position. If it does not stay
tight, try another seating position or contact
Graco at 1-800-345-4109.
10. To remove
LATCH
, push button while
pulling on the
LATCH
belt as shown
.
11. Press and hold
LATCH
release hinge
.
12. Push connector in, lift connector up and
pull out (away from anchor point)
.
13. Repeat steps 11 and 12 for other connector.
