Setup
3A7939A
11
Disinfectant Supply Options
You will need to determine which supply option will work
best for your job.
•
Hopper Feed
•
Suction Tube Feed
Your sprayer comes from the factory installed with a
disinfectant hopper. For bigger jobs, you can connect a
separate suction tube to draw disinfectant directly from a
larger container.
To use the suction tube, you will need to
and follow the
procedure.
Remove the Hopper
1. Disconnect fitting (24) from fitting (25).
WLD
2. Remove fitting (26) and fitting (24) from hopper (31).
3. Remove elbow (50) and fitting (25) from pump (9).
4. Remove nuts (6) and bolts (23) from hopper bracket
(19) to cart bracket (18).
5. Remove nuts (6) and bolts (23) from cart bracket
(18) and remove the bracket from cart (1).
Connect the Suction Tube
1. Install fitting (38) and elbow (39) to the pump (9).
WLD
2. Connect the suction tube (70), coupler (72), feed
tube (71), and strainer (73) to hose (33).
3. Connect hose (33) to elbow (39).
4. Proceed to
on page
12.
Connect the Hopper
1. Use nuts (6) and bolts (23) to attach the bracket (18)
to the cart (1).
2. Loosely attach hopper bracket (19) to cart bracket
(18) with nuts (6) and bolts (23).
3. Install elbow (50) and fitting (25) to the pump (9).
4. Install fitting (26) and fitting (24) to the hopper (31).
5. Connect fitting (24) to fitting (25).
6. Adjust the height on hopper bracket (19) until it fits
under the lip on the back of the hopper (31). Tighten
nuts (6).
7. Proceed to
on page
12.
